Lexmark T650 - Tray Roller Catch Assembly Removal; Upper Interface Cable Assembly Removal

Repair Information 4-197
4062-XXX
2. Remove the tray roller catch assembly from the drawer.
Tray roller catch assembly removal
1. Remove the media tray catch spring. Go to “Media tray catch spring removal” on page 4-158.
2. Remove the tray roller catch assembly from the drawer.
Upper interface cable assembly removal
1. Remove the 550-sheet frame assembly. Go to “Media size actuator removal” on page 4-159.
2. Disconnect the upper interface cable connector (A) from the 550-sheet controller card.