4-94 Service Manual
4062-XXX
5-bin mailbox media bin fifth deflector removal
1. Remove the rear door assembly. Go to “5-bin mailbox rear door assembly removal” on page 4-84.
2. With a spring hook, carefully remove the upper deflector gate spring and for ease of reassembly, temp
3. Temporarily hook the spring to the upper frame tab.
4. Unsnap each side of the deflector gate and remove.
Replacement Note: The static brush mylar assembly is attached to the media bin fifth deflector. Do not forget
to reinstall it on the new deflector.
To Next Page
Loading...
