Lexmark T650 - Sensor Shield Assembly Removal (T650, T652, T654)

4-72 Service Manual
4062-XXX
4. Disconnect the connection (B) from the sensor (input).
Sensor shield assembly removal (T650, T652, T654)
1. Remove the inner deflector. Go to “Inner deflector removal (T650, T652, T654)” on page 4-25.
2. Gently unsnap the sensor shield assembly from the machine.
3. Remove the sensor shield assembly.
Replacement Warning: When replacing the sensor shield assembly, ensure that the spring (A) is properly
aligned and the sensor shield assembly opens and closes properly.
A