Lexmark T650 - Sheet Pick Arm Bracket Assembly Removal

4-108 Service Manual
4062-XXX
550-sheet pick arm bracket assembly removal
1. Remove the 550-sheet media tray assembly. Go to “Media out actuator removal (models T652 and
T654)” on page 4-158.
2. Remove the two 550-sheet pick arm bracket assembly cable connectors (A) from the 550-sheet controller
card assembly.
3. Detach the 550-sheet bellcrank recoil spring (B) from the drawer.
4. Remove the four screws (C) securing the 550-sheet pick arm bracket assembly to the drawer.
5. Remove the 550-sheet pick arm bracket assembly.
A