Lexmark T650 - Main Drive Motor Assembly Removal (T650, T652, T654)

4-34 Service Manual
4062-XXX
7. Remove the fuser cooling fan connection (C).
Main drive motor assembly removal (T650, T652, T654)
1. Remove the system card assembly. Go to “System card assembly removal (T650, T652, T654, T656)”
on page 4-76.
2. Remove the fuser drive release linkage. Go to “Fuser drive release linkage removal (T650, T652, T654)”
on page 4-23.
3. Close the operator panel door assembly.
4. Remove the four screws (A) securing the main drive motor assembly to the machine.
5. Gently remove the main drive motor assembly.
B
C