Lexmark T650 - SFP Stapler Assembly Sensor (Finisher bin Media Present) Removal

Repair Information 4-177
4062-XXX
4. Remove the LED sensor cover.
SFP stapler assembly sensor (finisher bin media present) removal
1. Remove the LED sensor cover. Go to “SFP stapler assembly LED sensor cover removal” on
page 4-176.
2. Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
3. Remove the harness connected to the media bin present sensor.
4. Remove the sensor (finisher bin media present).
A