Lexmark T650 - Sheet Frame Assembly Removal; Sheet Media out Actuator Removal

4-104 Service Manual
4062-XXX
250-sheet media out actuator removal
Note: Carefully remove the base machine from the input option tray assembly before proceeding.
1. Remove the 250-sheet pick arm bracket assembly. Go to “250-sheet pick arm bracket assembly
removal” on page 4-102.
2. Release the hook (A) securing the 250-sheet media out actuator to the 250-sheet pick arm bracket
assembly.
3. Remove the 250-sheet media out actuator from the drawer.
250-sheet frame assembly removal
Note: The 250-sheet frame assembly is not a FRU.
1. Remove the 250-sheet pick arm bracket assembly. Go to “250-sheet pick arm bracket assembly
removal” on page 4-102
2. Release the hooks securing the sensor (pass through) to the drawer.
3. Remove the sensor (pass through) from the drawer.
A