Lexmark T650 - Tray Roller Catch Assembly Removal (T650, T652, T654)

Repair Information 4-81
4062-XXX
2. Gently unsnap the transfer deflector from the machine.
3. Remove the transfer deflector.
4. Remove the screw (A) securing the ground wire to the transfer deflector.
5. Remove the ground wire.
Replacement Warning: When replacing the transfer deflector, ensure that the ground wire is properly
replaced.
Tray roller catch assembly removal (T650, T652, T654)
1. Remove the media tray.
2. Remove the HVPS card assembly. Go to “HVPS card assembly removal (T650, T652, T654)” on
page 4-24.
3. Release the spring from the machine.
Note: The tray roller catch assembly should be removed from the media tray cabinet.
A