Repair Information 4-39
4062-XXX
MPF pick solenoid assembly removal (T650, T652, T654)
Note: The MPF lift plate assembly can be detached and allowed to hang by the harness. The connection does
not need to be disconnected.
1. Remove the MPF lift plate assembly. Go to “MPF lift plate assembly removal (T650, T652, T654)” on
page 4-37.
2. Remove the side cover, left. Go to “MPF cam gear removal (T650, T652, T654)” on page 4-37 or “Side
cover, left removal (T652 and T654)” on page 4-66.
3. Remove the six screws (A) securing the metal cover to the machine.
4. Remove the metal cover.
To Next Page
Loading...
