Lexmark T650 - Transfer Roll Bracket Assembly, Right Removal (T650, T652, T654); Transfer Deflector Removal (T650, T652, T654)

4-80 Service Manual
4062-XXX
9. Remove the ground wire (F).
Replacement Warning: When reinstalling the transfer roll bracket assembly, left, ensure that the bushing (C),
spring (D), and ground wire (F) are properly replaced.
Transfer roll bracket assembly, right removal (T650, T652, T654)
1. Remove the transfer roll assembly. Go to “Transfer roll assembly removal (T650, T652, T654)” on
page 4-78.
2. Remove the inner deflector. Go to “Inner deflector removal (T650, T652, T654)” on page 4-25.
3. Remove the screw (A) securing the transfer roll bracket assembly, right to the machine.
4. Remove the transfer roll bracket assembly, right.
Transfer deflector removal (T650, T652, T654)
1. Remove the transfer roll assembly. Go to “Transfer roll assembly removal (T650, T652, T654)” on
page 4-78.
A
C
D
B
F
E
A