Lexmark T650 - Sheet Bellcrank Recoil Spring Removal; Sheet Frame Assembly Removal

Repair Information 4-109
4062-XXX
550-sheet bellcrank recoil spring removal
1. Remove the 550-sheet pick arm bracket assembly. Go to “550-sheet pick arm bracket assembly
removal” on page 4-108.
2. Remove the 550-sheet bellcrank recoil spring from the 550-sheet pick arm bracket assembly.
550-sheet frame assembly removal
Note: The 550-sheet frame assembly is not a FRU.
1. Remove the 550-sheet pick arm bracket assembly. Go to “550-sheet pick arm bracket assembly
removal” on page 4-108.
2. Release the hooks securing the sensor (pass through) to the drawer.
3. Remove the sensor (pass through) from the drawer.