Lexmark T650 - Side Cover, Right Removal (T652, T654)

4-68 Service Manual
4062-XXX
4. Remove the five screws (A) securing the side cover, right to the machine.
5. Remove the side cover, right.
Side cover, right removal (T652, T654)
1. Open the operator panel door assembly.
2. Open the MPF tray door assembly.
3. Remove the cover assembly, rear lower. Go to “Cover assembly, rear lower (T652, T654)” on page 4-13.
4. Remove the five screws (A) securing the side cover, right to the machine.
5. Remove the side cover, right.
Sensor (duplex input) removal (T652, T654)
1. Remove the duplex input sensor assembly. Go to “Duplex input sensor assembly removal (T652, T654)”
on page 4-20.
A A
A A