Repair Information 4-9
4062-XXX
3. Remove the metal cover.
4. Remove the inner deflector. Go to “Inner deflector removal (T650, T652, T654)” on page 4-25.
5. Remove the MPF pick solenoid assembly. Go to “MPF pick solenoid assembly removal (T650, T652,
T654)” on page 4-39.
6. Remove the two screws (B) securing the alignment assembly to the machine.
Note: The adjuster screw (C) requires a hex wrench to loosen and tighten.
Note: The adjuster screw (C) can be accessed through the hole (D) in the system card.
7. Completely loosen the adjuster screw (C) securing the alignment assembly to the machine.
To Next Page
Loading...
