Lexmark T650 - Loading the Standard or Optional 250-Sheet or 550-Sheet Tray

2-18 Service Manual
4062
200.38 Sensor (input)
lingering jam
Source = Tray 3
Tray level = Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.39 Sensor (input)
lingering jam
Source = Tray 3
Tray level = Empty
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.47 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Not Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.48 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.49 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Empty
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.57 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Not Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.58 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
200.59 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Empty
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-132.
201.00 Sensor (fuser output)
area jam.
Type 1 fuser
The media is jammed in the
sensor (fuser output) area.
Go to sensor (fuser output)
service check.
See “Sensor (fuser output)
service check” on
page 2-126.
Error
code or
message
Error contents Description/Action Possible repair actions