Lexmark T650 - Page 54

2-20 Service Manual
4062
201.26 Main drive motor
assembly load error.
Type 2 fuser
The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.
1. Check all connections on
the main drive motor
assembly.
2. Check all connections on
the system card assembly.
3. Replace the main drive
motor assembly if problem
remains. Go to “Output
cover assembly removal
(T650, T652, T654)” on
page 4-54.
201.27 Sensor (fuser output)
late jam.
Type 2 fuser
The media is late reaching the
sensor (fuser output) within the
specified time.
Go to sensor (fuser output) late
jam service check.
See “Sensor (fuser output)
late jam service check.” on
page 2-135.
If problem remains, a type 2
fuser can be installed.
201.28 Image data did not
start in time
Type 2 fuser
Printhead write failure 1. Check all connections on the
printhead assembly
2. Check all connections on the
system card assembly.
3. Replace the printhead
assembly if problem remains.
4. Replace the system card
assembly if problem remains.
Go to “System card
assembly removal (T650,
T652, T654, T656)” on
page 4-76.
201.29 Sensor (narrow
media) late jam
Type 2 fuser
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
Go to sensor (narrow media)
late jam service check.
See “Sensor (narrow media)
late jam service check.” on
page 2-139.
201.30 Operator panel door
assembly interlock
switch failure
Type 2 fuser
The printer detected that the
operator panel door interlock
switch did not cycle prior to
printer restart.
1. Remove all media present
in media path.
2. Ensure that the operator
panel door assembly is fully
open then fully closed.
3. Check operator panel door
assembly for damage.
4. Check interlock switch (in
left operator panel hinge)
for damage.
5. Check all connections on
the system card assembly.
201.31 Sensor (narrow
media) late jam
Type 2 fuser
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
Go to sensor (narrow media)
late jam service check.
See “Sensor (narrow media)
late jam service check.” on
page 2-139.
Error
code or
message
Error contents Description/Action Possible repair actions