LINET Multicare X User Manual

D9U001MCX-0101_03
52
Status (Pop-up window)
Meaning How to change the status
Lateral Tilt with siderail folded down is
limited to 15°. Transfer Mode is activated.
Use Lateral Tilt with siderail
folded down to facilitate patient
transfer.
Lateral Tilt that can be adjusted by pedals
of Lateral Tilt Foot Control is limited to
15°.
Use LCD touchscreen on Mul-
tiboard X or Attendant Control
Panel to continue in lateral tilting
above 15°.
Lateral Tilt is limited to 15° because Bac-
krest Angle is in more than 30°.
Lower the Beckrest to less than
30° to continue in lateral tilting
above 15°.
Lateral Tilt is limited to 15° because the
bed is loaded with more than 150 kg.
Remove load to continue in late-
ral tilting above 15°.
Longitudinal tilt adjustment (Trendelen-
burg tilt and Antitrendelenburg tilt) is disa-
bled during the set lateral tilt of the bed.
Decrease the lateral tilt angle to
continue in longitudinal tilt adjus-
tment.
Automatic Lateral Therapy is disabled
because the bed is disconnected from
the mains power.
Connect bed to the mains power
to enable the Automatic Lateral
Therapy.
MAX 15°
Transfer mode active.
Lateral tilt limited to 15°.
Max angle by foot controls reached.
Use controls in siderail or ACP to
continue.
Lateral tilt limited to 15°.
Lower the angle of backrest bellow 30°
to continue.
>30°
MAX 15°
Lateral tilt is limited.
Load exceeded.
MAX
TR/ATR locked during lateral tilt.
ALT disabled. Bed disconnected.
Plug bed into socket.

LINET Multicare X Specifications

General

Brand	LINET
Model	Multicare X
Category	Medical Equipment
Language	English