LINET Multicare X User Manual

D9U001MCX-0101_03
56
Status (Pop-up window)
Meaning How to change the status
Bed is overloaded by more than 250 kg.
Safe Working Load is exceeded by more
than 10 kg.
Remove load!
OptiCare X System Control Unit (SCU) is
disconnected.
Contact service department
approved by manufacturer!
Automatic CPR deation is not available.
OptiCare X System Control Unit could be
disconnected.
Use manual CPR valve on a
mattress side to deate the Opti-
Care X mattress!
System fault of the Multicare X bed!
Stop using the Multicare X bed
and contact service department
approved by manufacturer!
Scales system is disconnected and its
functions are disabled! Bed Exit Alarm
Monitoring and automatic pressure
settings of the OptiCare X mattress are
disabled!
Contact service department
approved by manufacturer!
Column unit fault!
Contact service department
approved by manufacturer!
Bed overloaded.
Remove load from the bed.
>250 kg
B123
Pump is disconnected. Call service.
OK
SERVICE
B200
Mattress disconnected.
Use manual CPR.
B125
System fault.
Stop using bed. Call service.
SERVICE
B 111
Scale system and BEA disconnected. Auto
pressure settings disabled. Call service.
OK
B202
SERVICE
Columns fault.
Call service.
SERVICE
B121-x

LINET Multicare X Specifications

General

Brand	LINET
Model	Multicare X
Category	Medical Equipment
Language	English