Need help?Do you have a question about the Link Controls CS 320 and is the answer not in the manual?
General| Brand | Link Controls |
|---|---|
| Model | CS 320 |
| Category | Control Unit |
| Language | English |
Details copyright, reproduction policy, and document notes for technical progress.
Covers warranty, intended use, and target group for safe operation and maintenance.
Details the CS 320 controller's design for industrial areas and its connection capabilities.
Lists different housing, LCD monitor, and command device variants available for the CS 320.
Provides an explanation of the CS 320 motherboard components and their connections.
Details critical safety warnings and precautions for electrical installations.
Explains prerequisites and wiring diagrams for connecting the controller to the mains supply.
Illustrates wiring for various command devices like UP/STOP/DOWN switches and buttons.
Describes how to connect programmable inputs for diverse functions like week timers or brake monitoring.
Covers safety input requirements according to EN 12453 for components like safety strips.
Details the automatic detection and programming of components upon first commissioning.
Guides on checking drive direction and setting mechanical or electronic limit positions.
Explains the controller's programming features, including LCD monitor overview and operating modes.
Provides a guide to navigating the controller's menu and parameters via the LCD monitor.
Details various operational modes like Automatic, Input, and Diagnosis for system functions.
Lists common faults, their causes, and recommended rectification steps for the controller.
Describes fault indications via LED H2 on the motherboard and their meanings.
Provides mechanical and electrical specifications, including operating conditions and protection grades.
Details the safety category and performance level per EN ISO 13849-1 for various functions.
Outlines service procedures, maintenance requirements, and safety warnings.
Contains the declaration of incorporation and conformity for the CS 320 controller.
Includes safety circuit measuring points and an overview of system connections.
To Next Page