Link Controls CS 320 - Connection of External Radio Receiver; Connection of Frequency Converter

To Next Page

To Previous Page

22 – Control CS 320 / Rev.D 1.01 Control CS 320 / Rev.D 1.01 – 23

5.18 5.18 Connection of external radio receiverConnection of external radio receiver

In addition to the standard connection of an external radio

“5.8/5”Externalradioreceiver)thereisalsoanadditional

optional pre-wired, pluggable variant.

X12

5.18 / 1

REFERENCE

For a precise description of the function and connection,

refer to the separate documentation for the BUS modules.

5.19 5.19 Connection of frequency converterConnection of frequency converter

It is possible to connect a Siemens frequency converter for

speed-independent control of the door drive via interface

X18.

X18

5.19 / 1

ATTENTION!

Property damage due to improper installation!

When using a frequency converter, the drive, wiring and

converter module must be compatible.



Please contact technical support.

REFERENCE

For a precise description of the function and connection,

refertotheseparatedocumentationfortheCS320FU.