Link Controls CS 320 - Manufacturers Declaration

60 – Control CS 320 / Rev.D 1.01 Control CS 320 / Rev.D 1.01 – 61
14. Manufacturer’s declaration
Marantec LegdenGmbH&Co.KG
Neue Mühle 4
D - 48739 Legden
Declaration of incorporation
in accordance with the Machinery Directive 2006/42/EC for
the incorporation of an incomplete machine per Annex II,
Part1B.
Declaration of conformity
in accordance with the directives:
− Electromagnetic Compatibility 2014/30/EU
− RoHs2011/65/EU
We hereby declare that the product cited below
Product designation: Door control
Type designation: CS320
is an incomplete machine intended exclusively for incorpora-
tion in a door system and has been developed, designed and
produced in accordance with the following directives:
− Machinery Directive 2006/42/EC
− Electromagnetic Compatibility Directive 2014/30/EU
− RoHsDirective2011/65/EU
Furthermore,italsosatisestherequirementsoftheLow
Voltage Directive 2014/35/EU per Annex I Part 1.5.1 of the
Machinery Directive 2006/42/EC.
Applied standards:
EN 12453:2017 Doors - Safety in use of power operated
doors: Requirements and test methods
EN 12978 Doors and gates - Safety devices for
power-operated doors and gates:
Requirements and test methods
EN ISO 13849-1 Safety of machinery - Safety-related parts
of control systems -
Part 1: General principles for design
EN 60335-1 Safety of household and similar electrical
appliances -
Part 1: General requirements
EN 60335-2-103 Safety of household and similar electrical
appliances -
Part 2-103: Particular requirements for
drives for gates, doors and windows
EN 61000-6-2 Electromagnetic compatibility (EMC) —
Part 6-2: Generic standards – Immunity for
industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC) —
Part6-3:Genericstandards—Emitted
interference for residential, commercial and
light-industrial environments
The relevant technical documentation has been compiled in
accordance with Annex VII, part B of the Machinery Directive
(2006/42/EC). We undertake to transmit, in response to a
reasoned request by the market surveillance authorities, this
information in electronic form within a reasonable term.
Person authorised to compile the technical documentation is
the signer
Incomplete machines in accordance with the EC directive
2006/42/EC are only intended for incorporation in other ma-
chines or incomplete machines or systems or for combination
with them, in order to form a machine with them in accor-
dance with the aforementioned directive. This product must
therefore not be put into service until the complete machine
/ system into which it is incorporated is compliant with the
provisions of the aforementioned EC directives.
A change to this product that has not been approved by us
results in this declaration losing its validity.
Legden, 01.01.2021
Dirk Wesseling, Management