LKC TECHNOLOGIES RETeval

To Next Page

To Previous Page

RETeval Complete Option

RET

eval

Device User Manual 61

An example of a photopic negative response protocol with reference data is shown below. In

this report, the stimulation waveform is shown. See page 11 for turning this feature on/off.

Main Page

Table of Contents3
Welcome to RET Eval6
What's in the Box7
Getting Started8
Connect the Cord to the Docking Station and Plug in8
Let the Device Charge8
Connect the Sensor Strip Lead8
Device Controls9
Main Menu9
Settings10
Performing a Test13
Viewing Results17
Results on the Device17
Results on a PC18
Reflex Testing20
Choosing a Protocol21
DR Assessment21
Other Protocols23
Additional Activities24
Removing Old Results from the Device24
Updating Firmware25
Electronic Medical Record (EMR) Support25
Reteval Flicker Option26
Flicker Protocols26
Custom Protocols27
Flicker Test Results27
Reteval-S Option32
Reteval-S Protocols32
Reteval-S Test Results36
RET Eval Complete Option40
Reteval Complete Protocols40
Custom Protocols52
Performing a VEP Test53
Reteval Complete Test Results55
Reference Intervals68
Using Reference Intervals as Clinical Decision Limits69
Turning Reference Data Reporting on and off70
Using Your Own Reference Data70
Reference Data Details70
Troubleshooting Hints76
Charge the Battery When the Charge Is Low76
Measure the Patient's Right Eye First76
Place the Sensor Strips under the Correct Eye76
The Device Shows "Excessive Electrode Noise77
The Device Won't Let Me Press the Start Test Button When I Can See the Eye78
After Pressing the Start Test Button, I Get an "Excessive Ambient Light" Error78
After Pressing the Start Test Button, I Get an "Unable to Calibrate" Error79
The Screen Is Blank but the Power Light Is on79
The Reteval Device Won't Connect to My PC79
I Get a "Scan and Fix" Error from Windows80
Results Are "Not Measurable80
Reset Settings80
Device Language Is Set to an Unfamiliar Language81
An Error Code Is Reported81
Works Cited82
Regulatory and Safety Information86
Applicability86
Intended Use86
Indications for Use86
Latex Statement86
Specifications87
Contraindications87
Cleaning and Disinfection88
Sterilization89
Biocompatibility89
Calibration and Storage89
Service / Repairs89
Product Performance89
Essential Performance90
Operating Environment90
Lifetime90
Precautions90
Electromagnetic Compatibility (EMC)91
Rohs95
California Proposition 6596
Symbols97
Equipment Identification98
Approvals99
Intellectual Property100
Contact Information101
Support101
Warranty101
Purchasing Supplies and Accessories102

Other manuals for LKC TECHNOLOGIES RETeval

Quick Reference Guide2 pages

LKC TECHNOLOGIES RETeval - Page 62

Table of Contents

Other manuals for LKC TECHNOLOGIES RETeval