Lorenz PANORAMIC 8 SUN - Menu Options; Data Entry

25
User Manual
Warning!
THIS IS THE RECOMMENDED WAY TO REMOVE THE C-CARD FROM THE
CHART PLOTTER. If opening the door the C-CARD remains fixed into the chart plotter slot,
do not try to remove it, but close the door again pressing it a lot so the C-CARD remains fixed
into the door. When you try to open the door again, the C-CARD will eject out of the slot.
Note
C-MAP is continuously creating new charts and revising old ones. If you wish to receive
information on the newest available charts, you can write for the catalog of available C-MAP
C-CARD at your dealer.
2.7 MENU OPTIONS
You may select how the chartplotter displays primary information (such as
how time is displayed) from the Functions Menu.
'MENU'
Refer to Chapter 5 for more information on Main Menu.
2.8 DATA ENTRY
Information is keyed into the chartplotter when editing a Waypoint, enter-
ing a Route or using the Fix Correction functions. When the field is highlighted:
- Enter or edit data by pressing up/down cursor key to step through the
available characters until the preferred character is displayed.
- Press right cursor key to move the cursor to the right.
- Use left cursor key to move the cursor to the left.