Lorenz PANORAMIC 8 SUN - User Points; Depth Window; Units Selection; Nav Aids Presentation

32
User Manual
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" +
'ENTER'
3.2.4 USER POINTS
Selects the User Point display among On, Off or Icon. The default setting is On.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'
3.2.5 DEPTH WINDOW
Enables/Disables the display on the Depth Window on the screen. The de-
fault setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH WINDOW" + 'ENTER'
3.2.6 UNITS SELECTION
Allows to select the preferred unit for Distance, Speed, Depth and Altitude
(altitude of GPS Antenna on the medium sea level).
Speed: Kts(knots)/Mph(miles per hour)Kph(chilometres per hour). The default set-
ting is Kts.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'
Distance: Nm(Nautical Miles)/Sm(statute miles)Km(chilometres). The default set-
ting is Nm.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'
Depth: Ft(Feet)/FM(Fathoms)/Mt(Meter). The default setting is Ft.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH" + 'ENTER'
Altitude: Ft(Feet)/FL(Flight Level)/Mt(Meter). The default setting is Ft.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ALTITUDE" + 'ENTER'
Temperature: C/F. The default setting is C.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "TEMPERATURE" + 'ENTER'
3.2.7 NAV AIDS PRESENTATION
Allows to set the Nav Aids presentation as US or INTERNATIONAL. The
default setting is INTERNATIONAL. When selected it affects Lights, Signals, Buoys
& Beacons display.
- INT(International): Draws Nav-Aids using international symbology. All
components of Complex Objects are shown.