Lorenz PANORAMIC 8 SUN - Date Format; Wind Speed; Beeper; External Wpt

80
User Manual
5.1.3 DATE FORMAT
Sets you preferred date between MM-DD-YY (month-day-year) and DD-
MM-YY (day-month-year). The default setting is MM-DD-YY.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "DATE
FORMAT" + 'ENTER'
5.1.4 WIND SPEED
Selects the Wind Speed unit among Kts = Knots, m/s and Kmh = kilome-
ters per hour. The default setting is Kts.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "WIND
SPEED" + 'ENTER'
5.1.5 BEEPER
Turns On/Off the sound after pressing a key ("beep"). The default setting is On.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' +
"BEEPER" + 'ENTER'
5.1.6 EXTERNAL WPT
The coordinates of a Waypoint, received from a GPS connected to the chart-
plotter, can be stored into the chartplotter, if the GPS is NMEA-0183 protocol com-
patible and support the $BWC sentence (this symbol remains on the screen for 30
seconds). You may save it by placing a Waypoint or a Mark onto that symbol. As
soon as the chartplotter receives another $BWC sentence with the coordinates of a
new Waypoint, the symbol moves to the new point. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' +
"EXTERN WPT" + 'ENTER'
5.1.7 BACKLIGHT TIMEOUT
Disables (Off) or sets the desired value (among 1, 3, 5, 10 minutes) for the
backlight timeout of the chartplotter. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' +
"B. LIGHT TIMEOUT" + 'ENTER'
5.2 FIX
The Fix menu handles functions related to the Fix.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER'