Lorenz PANORAMIC 8 SUN - Page 41

43
User Manual
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Display Mode" + 'ENTER'
The table below shows the selections for each mode:
Setting Full Medium Low Radar Tides Custom
(Default values)
Place Names On On On On On On
Name Tags On Off Off Off Off Off
Nav-Aids & Light Sectors On No Sector No Sector No Sector Off On
Attention Areas On On Off Off Off On
Tides & Currents On Off Off Off On On
Seabed Type On Off Off Off Off On
Ports & Services On On Off On Off On
Tracks & Routes On Off Off Off Off On
Depth Range Min 3 Mt 3 Mt 3 Mt 3 Mt 3 Mt 3 Mt
Depth Range Max 10 Mt 10 Mt 10 Mt 10 Mt 10 Mt 10 Mt
Land Elevations On Off Off Off Off On
Land Elevation Data On Off Off Off Off On
Roads On Off Off Off Off On
POIs On Off Off Off Off On
Lat/Lon Grid On Off Off Off Off On
Chart Boundaries On Auto Off Off Off Auto
Mixing Levels On Off Off Off Off Off
Value Added Data On Off Off Off Off On
Chart Lock On On On On On On
Und. Objects Limit 9999Mt 10Mt 10Mt 10Mt 10Mt 10Mt
Rocks Icon+Depth Icon Icon Icon Icon Icon
Obstructions Icon+Depth Icon Icon Icon Icon Icon
Diffusers Icon+Depth Icon Icon Icon Icon Icon
Wrecks Icon+Depth Icon Icon Icon Icon Icon
Place Names: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Place Names" + 'ENTER'
Name Tags: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Name Tags" + 'ENTER"
Nav-Aids & Light Sectors : On (Nav-Aids & Light Sectors are shown)/Off (Nav-
Aids & Light Sectors are not shown)/No Sector (Nav-Aids are shown, Light Sectors
are hidden). The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Nav-Aids & Light Sectors" + 'ENTER'
Attention Areas: On/Off. The default setting is On. The Attention Areas will al-
ways be contour only when On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Attention Areas" + 'ENTER'