45
User Manual
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Chart Boundaries" + 'ENTER'
Value Added Data: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Value Added data" + 'ENTER'
Chart Lock: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Chart Lock" + 'ENTER'
Underwater Object Limit: Selects the max depth value to display Underwater Ob-
jects. The default setting is 10 Mt.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Underwater Object Limit" + 'ENTER'
• If value is set to 0 Mt, the Underwater Objects are not shown on the charts.
Menu options are grayed out.
• If value is more than 0 Mt (i.e. 10 Mt), in the Range from 0 Mt to the selected
value the Underwater Objects are displayed according to their setting below.
Rocks: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Rocks" + 'ENTER'
Obstructions: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Obstructions" + 'ENTER'
Diffusers: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Diffusers" + 'ENTER'
Wrecks: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Wrecks" + 'ENTER'
Note (*)
Choose the option:
• OFF : the object is not visible independently of the selected “Underwater
Object Depth Value”
• ICON : the object icon is visible without tags, in the range selected from
“Underwater Object Depth Value” option
• ICON+DEPTH : the object icon and tag is visible, in the range selected from “Under-
water Object Depth Value” option
To Next Page
Loading...
