LS MTRON XP8084 - Lubricants and Capacity

5 -4
5-3. Lubricants and Capacity
Lubricants Capacity International Standard Recommended items
Engine coolant
12 L
(3.2 U.S.gals.)
ASTM D5216
Soft water (50%)+
Anti-freeze (50%)
Fuel
115 L
(30.4 U.S.gals.)
ASTM D975 No.2
Ultra low sulfur diesel
DEF/urea solution
16 L
(4.2 U.S.gals.)
ISO 22241 / AUS32 /
DIN V70070
32.5% Urea solution
Engine oil
8.1 L
(2.1 U.S.gals.)
API CJ-4 or
ACEA E8
KIXX DL
(Manufacturer : GS Caltex)
Transmission oil
(common use for
hydraulic lift
and steering system)
55 L
(14.5 U.S.gals.)
API GL4
ISO VG 46/68
LSTH570
(LS Tractor T/M & Hyd. oil)
Manufacturer: GS Caltex or
S-OIL TOTAL Co. Ltd.
Front axle oil
8 L (2.1 U.S.gals) for
center housing
2 L (0.5 U.S.gals) for
each final housing
=12 L (3.1 U.S.gals)
API GL4
SAE 80W
EPK 80W90
(Manufacturer :
S-OIL TOTAL Co. Ltd.)
Grease
(Front axle holder,
3-point linkage)
Proper
amount
NLGI 2
MAHWAK Multi
purpose or MAHWAK All
purpose (Caltex)
Clutch & Brake oil
0.5 L
(0.1 U.S.gals.)
Mineral based oil
(ISO 7308)
LSTH400 (S-OIL TOTAL)
LHM PLUS (TOTAL)
LHM (Mobil)
LHM-S (Shell)
RECOMMENDED ENGINE OIL VISCOSITIES
The correct engine oil viscosity grade is dependent upon ambient temperature. Refer to the chart below
when selecting oil for your tractor engine.
In areas where prolonged periods of extreme temperatures are encountered, local lubricant practices
are acceptable. Contact your authorized local dealer.
Ambient temperature Lubricant No.
Cold mission
-28℃ ~ 35℃
(-18℉ ~ 95℉)
SAE 10W-30
European / North American
mission
-10℃ ~ 40℃
(14℉ ~ 104℉)
SAE 15W-40
Very hot countries / Heavy
mission
0℃ ~ 40℃
(32℉ ~ 104℉)
SAE 20W-40