3 -16
3
Horn operation
4
Operating turn signal lights
z This switch is used to give information to other
vehicles when turning to the left or right.
z If turning the switch to clockwise, the right turn
signal lights and the indicator are blinking.
- If turning the switch to counter-clockwise, the
left turn signal lights and the indicator are
blinking.
▶ When changing direction during driving on the road, operate turn signal light switch
to inform other vehicles of your direction.
Notice
z To sound off the horn, press the switch end to
the inside.
(8) Hazard warning light switch
z This is used to give information to other vehicles
in an emergency status. If you press the triangle
switch, all turn signal lights and indicators shall
be blinking.
▶ If using the hazard warning
lights for a long time, it may
cause high electrical
consumption and battery
discharge.
Notice
▶ When passing with other vehicles in the opposite lane at night, turn the headlights
to low beam not to disturb oncoming cars.
Caution
2
Turning ON/OFF High beam
z When pushing the switch downward from neutral
position, the switch shall be locked and the high
beam shall be ON.
z To turn off the high beam, return the switch to
neutral position.
Combination light switch
Horn
Right
Left
High beam
Neutral (Low beam)
Combination light switch
Hazard warning
light switch
To Next Page
Loading...
