4 -1
1. Sit in the
driver’s seat and
apply the
parking brake
lever.
2. Place the main gear shift lever,
range gear shift lever, shuttle lever
in NEUTRAL and PTO switch in
OFF position.
3. Push the throttle lever
to the middle position of
full throttle.
4. Turn the key switch to
“ON” and check if
engine oil pressure
indicator, battery
charging indicator, cold
start aid indicator is ON.
5. Wait until cold start aid
indicator is OFF.
(about 15 seconds)
6. Depress the clutch
pedal fully and turn the
key switch to “START”
position. As soon as the
engine starts, release
the key switch to “ON”
position.
7. Check if engine oil
pressure indicator,
battery charging
indicator is OFF. If any
of these indicators are
ON, stop the engine
immediately and check.
8. Run engine for a few
minutes to allow engine
oil and transmission oil
to warm up.
4. Operation and Work
4-1. Engine start and stop
(1) Engine start
Caution
▶Check each part before starting
the engine.
▶Check if there is some other
people around before starting.
▶Place all the levers and
switches in NEUTRAL or OFF
position.
Brake pedal
Shuttle lever
Clutch pedal
Throttle pedal
PTO gear
lever
Main gear
shift lever
Range gear
shift lever
Throttle lever
PTO switch
To Next Page
Loading...
