LS MTRON XP8084 - How to drive and stop

4 -4
Position control
lever
4-2. How to drive and stop
(1) How to drive
Brake pedal
Throttle
pedal
Main gear
shift lever
Shuttle lever
Clutch
pedal
Range gear
shift lever
▶Release the clutch pedal slowly. If releasing the clutch pedal suddenly, the gear life
shall be reduced and it may cause a sudden start.
Notice
1. Lift up the all implements
(front/middle/rear) from the ground
after starting engine.
2. Fix the engine rpm at 1500 RPM.
3. Press clutch pedal fully.
4. Place each gear lever (Main,
Range, Shuttle lever) on desired
position.
5. Press brake pedals and release
the parking brake lever.
6. Release clutch pedal slowly with
pressing throttle pedal slowly.