3 -40
▶ When driving on the road, lift up the implement by using the position control lever.
And, lock the down speed control knob.
▶ When lifting up or down the implement by using auto lift control switches, do not
approach the implement. And before using the switches, you have to check the
safety conditions of the working area.
Warning
(6) Auto lift control (MHL)
※ It is used to lift up the implement up to the
highest position quickly and lower it down to the
position set by position control lever without
using position control lever.
z Pull the auto lift up switch backward to lift up the
implement.
z Press the auto lift down switch to lower down the
implement. At this time, the auto lift up switch
returns forward automatically.
z When the auto lift up switch is pulled back, the
implement does NOT moved by position control
lever.
z When lifting up the auto lift up switch, the PTO
shaft stops in case the PTO mode switch is
“AUTO” (optional).
up
down
Auto lift
up switch
Auto lift
down switch
To Next Page
Loading...
