4 -10
PTO gear lever
Parking brake lever
PTO switch
PARK
1. Press down the clutch pedal and brake
pedals. Pull the throttle lever to “Low” speed
position. Place the shuttle lever, main gear
shift lever in neutral position and PTO switch
to “OFF” position.
3. Apply parking brake and release the brake
pedals and clutch pedal slowly.
2. Lower the implements to the ground. Turn
key switch to “OFF” position.
(5) Stopping tractor
Range gear
shift lever
Main gear
shift lever
Caution
▶ DO NOT leave the tractor with the transmission gear placed in the neutral position
and the parking brake not applied. The tractor may roll down.
Apply the parking brake at all times before leaving the tractor.
▶ Remove the ignition key always after stopping engine.
To Next Page
Loading...
