4 -6
Position control
lever
Brake pedals Throttle pedal
Main gear
shift lever
Shuttle lever
Clutch
pedal
Range gear
shift lever
▶Release the clutch pedal slowly. If not, the transmission gear life shall be reduced
and it may cause a sudden start.
Notice
(2) How to drive
① Synchro-shuttle model
1. Lift up all the implements
(front/middle/rear) from the ground
after starting engine.
2. Pull the throttle lever to the low
speed position.
3. Depress clutch pedal fully.
4. Place each gear lever (Main,
Range, Shuttle lever) on a suitable
position.
5. Press down the brake pedals and
release the parking brake lever.
6. Release the clutch pedal slowly
with pressing down the throttle
pedal slowly.
Throttle lever
To Next Page
Loading...
