Piccolo 40 from 82
www.lt-light.com
You can edit any needed parameter to do this process easy (for example edit dimmer level).
Take in mind that only the adecuated parameters will be stored!
Modifying texts of libraries:
It’s possible to access to the whole libraries-list of one of the categories to edit their names.
- Activate [LIBs], its LED is lit.
- [POS] [MDFY]
- Edit names of any stored position.
- [EXIT] to return to the main screen.
Libraries & Modifications “in Live”
(a) If any value of a library applied in editor is modified, it’s posible to update this library with
the new value.
To update the modified library with the new value, press:
[MDFY] [COL] Confirm with [REC]
(b) Modifying, in live mode, a cue or group using the commands:
{modifications} [MDFY] [MDFY] or {modifications} [MDFY] [Sn]
If some of the modified values, was edited with a library, the console answers to you if the
modification will be done in corresponding library or only in cue/group. In this way, you
can update the corresponding libraries, dynamically and quickly, avoiding delete libraries by
error.
Press [REC] to update the library, or [] to modified with to update libraries.
Note: Si a same library, in example, of color (except to positions and dimmers* libraries), is
modified with different values in different fixtures, the real value for the modification will be
obtained from the first active fixture, if no active fixtures, from the first present fixture in editor.
Deleting libraries. A diferencia de las paletas, las librerías se pueden borrar. Podemos borrar una
librería, un rango de ellas, o todas las librerías de un tipo:
- Activate [LIBs], its LED is lit.
- [POS] [#] ([THRU] [#])[DELETE], to delete the position # (or the selected range).
- Confirm pressing [DELETE] again.
To Next Page
Loading...
