Piccolo 43 from 82
www.lt-light.com
Only admits position parameters defined in its type as L = p
[COL],
[GOB],
[BEAM],
[XTRA]
Library by fixture Type.
Only admits color parameters defined in its type as L = c
Or gobo parameters defined in its type as L = g
Or beam parameters defined in its type as L = b
Or xtra parameters defined in its type as L = x
All libraries are affected by the option LIB REC MODE
[EDT+]
[EDT+] function, from this version, is a completely new function that allows to you to use fade
times in live for process to edition.
From now, it’s possible to set a fade time, in live and temporally, applying a library, doing a TEST
of cue, group, or doing a HOME.
FADE TIME FOR LIBRARIES
Remember, to select a Library, it’s needed to activate [LIBs].
For next commands block, is a category key: [DIM], [POS], [COL], [GOB], [BEAM] or
[XTRA]
Command block for temporized Libraries:
From Editor
(Examples with POSICION 1)
Form Bank keys:
B.1 to B.0
[n][ENTER]
[POS][1][ENTER]
Library n is applied in a cut time,
suddenly, over the editor selection.
[EDT+][#] [n] [ENTER]
[EDT+][3][POS][1][ENTER]
[EDT+][#][B.n][B.n]..
[EDT+][3][B.1]
Library n is applied fading in #
seconds (# from 0,1 to 999.9 sec; 3
sec in example), over the editor
selection.
*Note 1: Only parameters set as “fade” are affected for these times.
To Next Page
Loading...
