Lutron Electronics RadioRA - Page 29

RadioRA® Setup Guide 3-2
Adding Basic System Components
Step 3 Complete Repeater activation
The green ACTIVATE REPEATER LED on
ALL Repeaters will turn OFF. The MAIN or
AUXILIARY green LED will remain ON.
• Repeaters are now activated.
Press and hold the ACTIVATE REPEATER
button on any Repeater until the green
ACTIVATE REPEATER LED turns OFF
(approximately 3 seconds).
Section 3 - Expanding Your System
MAIN
REPEATER
REPEATER
CONTROLS
ACTIVATE
BEEP
FLASH
VERIFY
AUXILIARY
MAIN
REPEATER
REPEATER
CONTROLS
ACTIVATE
BEEP
FLASH
VERIFY
AUXILIARY