100
When set to Note, these are the available parameters:
Note: The Clip button will send its MIDI messages using this Note number.
Available Values: C-2 – G8
Latch: When set to Latch On, the Clip button will send one value when pressed and a different
value when pressed a second time, alternating between the two values with each press. When
set to Latch Off, the Clip button will send one value when pressed and one value when
released.
Available Values: On/Off
Note On: When Latch is active, the Clip button will send the MIDI note number with this
velocity when you press it to turn it on.
Available Values: 0-127
Note Off: When Latch is active, the Clip button will send the MIDI note number with this
velocity when you press it to turn it off.
Available Values: 0-127
Shortcuts and Hot Keys
To edit the functionality of a Hot Key control – Metronome, or Pads 1 - 16 when in DAW Edit
Mode, press and hold the SHIFT button and press the TEMPO/METRO button or one of the
PADs. You can scroll through the available parameter values using the Encoder. Select what
parameter you would like to edit by pressing the Encoder.
Note: What some parameter values are set to will affect what parameters are available for
editing. For example, if the Button’s Mode parameter is changed from Note to Program, it will
change the editable parameters from Note parameters to Program parameters.
Mode “MODE”:
• ASCII Shortcut Key message “KEY”: Selects the PC keyboard key or PC keyboard key
combination message.
• CC
“CC”: The Metronome button or Pad will send its Shortcut message using this CC
number.
• Note
“NOTE”: The Metronome button or Pad will send its Shorcut message using this
Note number.
• Off
“OFF”: The Metronome button or Pad will not send a Shorcut message when
pressed.
Color “COLOR”: Select the color that you want to assign to the Shortcut.
Key: Selects the QWERTY keyboard key that will be triggered by the pad or metronome.
Win Mod Key: Selects the Windows QWERTY keyboard key modifier that will be triggered by
the pad or metronome.
Mac Mod Key: Selects the macOS QWERTY keyboard key modifier that will be triggered by
the pad or metronome.
When set to CC, these are the available parameters:
CC: The Clip button will send its MIDI messages using this CC number.
Available Values: 0-127
To Next Page
Loading...
Need help?
General
