M-Audio Oxygen Pro Series User Manual

69
Fader Buttons
To edit one of the Fader Buttons when in Preset Edit Mode, press a fader button. You can
scroll through the available parameter values using the Encoder. Select what parameter you
would like to edit by pressing the Encoder.
Channel: The fader button will send its messages over this channel. Select the global channel
(Global), a specific channel (Channel 1–16), a zone (Zone 1–4), or all channels (Omni).
Available Values: Global, 1-16, Zone 1-4, Omni
Mode “MODE”:
• CC
“CC”: The fader button will send its MIDI messages using this CC number.
• CC Cycle
“CC CYCLE”: The fader button will send the value with this CC number when
you press it, one at a time, cycling through them with each press.
• CC Inc/Dec
“CC INC/DC”: The fader button will send the next (Increment) or previous
(Decrement) value number in the range of values when you press it.
• Program
“PROGRAM”: The fader button will send this program number when you press
it.
• Program Cycle
“PRG CYCL”: The fader button will send the value with this Program
number when you press it, one at a time, cycling through them with each press.
• Inc/Dec
“PG IN/DC”: The fader button will send the next (Increment) or previous
(Decrement) program number in the range of programs when you press it.
• Note
“NOTE”: The fader button will send its MIDI messages using this Note number.
When set to CC, these are the available parameters:
CC: The fader button will send its MIDI messages using this CC number.
Available Values: 0-127
Press: The fader button will send the MIDI CC number with this value when you press it.
Available Values: 0-127
Release: The fader button will send the MIDI CC number with this value when you release it.
Available Values: 0-127
When set to CC Cycle, these are the available parameters:
CC: The fader button will send its MIDI messages using this CC number.
Available Values: 0-127
Press: The fader button will send the MIDI CC number with this value when you press it.
Available Values: 0-127
Release: The fader button will send the MIDI CC number with this value when you release it.
Available Values: 0-127

M-Audio Oxygen Pro Series Specifications

General

Knobs/Encoders	8
Aftertouch	Yes
Key Action	Semi-weighted
Arpeggiator	Yes
Smart Chord/Chord Mode	Yes
Smart Scale/Scale Mode	Yes
Faders	9
Connectivity	USB
Pedal Inputs	Sustain
Power	USB bus power
Software	Pro Tools First, MPC Beats, Ableton Live Lite, AIR Music Tech Virtual Instruments (Hybrid 3, Velvet, Mini Grand, Vacuum Pro)
DAW Compatibility	Ableton Live, Logic Pro
Key Count	25, 49, 61