23
Octaves and Transposition
By using the Key Octave –/+ buttons, the keyboard can access the full range of 127 available
MIDI notes (10 octaves). Additionally, you can transpose the keyboard up to 12 semitones (1
octave) in either direction.
To change the octave of the keyboard, use the Key Octave –/+ buttons to lower or raise the
octave, respectively. The display will temporarily show OCT and the current octave shift.
Oxygen Pro 25’s keyboard can be shifted 4 octaves down or 5 octaves up.
Oxygen Pro 49’s keyboard can be shifted 3 octaves down or 4 octaves up.
Oxygen Pro 61’s keyboard can be shifted 3 octaves down or 3 octaves up.
To change the transposition of the keyboard, press and hold Shift, and then use the Key
Octave –/+ buttons to lower or raise the keybed by one one, respectively. The display will
temporarily show TRANS and the current transposition (-12 to 12).
Tempo Control
To edit the Tempo button, press the Tempo button. You can either repeatedly tap the TEMPO
button to enter in the tempo, or press and hold the TEMPO button to enter into the TEMPO
EDIT mode. Once in the TEMPO EDIT mode you can scroll through the available parameter
values using the Encoder. Select what parameter you would like to edit by pressing the
Encoder.
Clock Source “CLOCK”: Selects whether the tempo is sent from the keyboard’s internal
tempo or synced to an external DAW.
Available Values: Internal, External
BPM ###.: 20.00 – 240.00
BPM .#: .0 – .9
Note: Clock messages are sent and received on Oxygen Pro Port 1 (Oxygen Pro ##/USB
MIDI).
Note Repeat/Latch Button
When this button is pressed and held it will activate the Pad’s Note Repeat/Roll functionality.
If SHIFT and this button are pressed together, then that will activate the Note Repeat button’s
Latch feature.
While Note Repeat is active, the Select/Scroll Encoder can be used to change the current
Time Division setting of the Arpeggiator and pad Note Repeat:
• 1/4
• 1/4T
• 1/8
• 1/8T
• 1/16
• 1/16T
• 1/32
• 1/32T
Note: You can also use the 1/4, 1/8, 1/16, and 1/32 fader buttons to change tempos. To
access the triplet functionality of a Time Division button, double press the desired Time
Division button.
To Next Page
Loading...
Need help?
General
