EasyManuals Logo

M-Audio Oxygen Pro Series User Manual

M-Audio Oxygen Pro Series
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Initial Setup
Initial Setup – PC Selection
Your Oxygen Pro has the ability to control all of your DAW's faders, buttons, knobs, pads, and
favorite DAW shortcuts, as well as all of your virtual instrument controls. In order to have these
controls set properly, we'll first need to get your Oxygen Pro to set to the correct PC
Operating System.
1. Ensure your Oxygen Pro is set to the correct PC Operating System by doing the
following. This will ensure all of the DAW Shortcuts work correctly.
2. Press and hold the SHIFT button and press the BACK/GLOBAL button (Oxygen Pro 25)
or the SHIFT button and press the MODE/GLOBAL button (Oxygen Pro 49 and 61)
entering into the GLOBAL EDIT mode.
3. In the GLOBAL EDIT menu use the ENCODER to scroll to PC. Once you have PC
highlighted, press the ENCODER to enter into PC selection. Then use the ENCODER to
select your PC’s Operating System Windows “WIN” or macOS “MAC”.
4. Once you have selected your PC setting, press the BACK button to exit out of the
GLOBAL EDIT menu.
Initial Setup - DAW Setup
Now that you've selected the correct Operating System. we'll set your Oxygen Pro to work
with your DAW.
1. Press and hold the DAW Button to open the DAW Select menu on the Display.
2. Turn the Select/Scroll Encoder to cycle through the available DAWs on the Display. As
you turn the Encoder, the currently selected DAW will update on the Display. The User
option enables you to map custom DAW controls to the keyboard, as described in the
Operation section.
3. When the DAW you want is shown on the Display, press the Select/Scroll Encoder to
confirm your selection.
Note: To exit out of DAW Selection Mode without changing the currently selected DAW,
press the Back Button.
Most DAWs will automatically recognize the Oxygen Pro series keyboard, and automatically
configure your Oxygen Pro’s controls as a control surface in DAW mode, and virtual
instrument controller in Preset mode.
If your DAW does not automatically configure your Oxygen Pro series keyboard, please follow
the setup steps listed in the Oxygen Pro DAW Setup Guides.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the M-Audio Oxygen Pro Series and is the answer not in the manual?

M-Audio Oxygen Pro Series Specifications

General IconGeneral
Knobs/Encoders8
AftertouchYes
Key ActionSemi-weighted
ArpeggiatorYes
Smart Chord/Chord ModeYes
Smart Scale/Scale ModeYes
Faders9
ConnectivityUSB
Pedal InputsSustain
PowerUSB bus power
SoftwarePro Tools First, MPC Beats, Ableton Live Lite, AIR Music Tech Virtual Instruments (Hybrid 3, Velvet, Mini Grand, Vacuum Pro)
DAW CompatibilityAbleton Live, Logic Pro
Key Count25, 49, 61

Related product manuals