61
Saving a User DAW
To store a User DAW:
1. Press SHIFT and the DAW/Preset button to enter Edit Mode. The OLED will display
“EDIT” in the top row, and depending on the current DAW/Preset mode selection, will have
Preset or DAW highlighted in the second row.
Note: When Preset or DAW is highlighted you can turn the Encoder to change from
editing DAW or Preset mode, changing the current selection.
2. Press the Encoder to enter into either DAW or Preset edit mode.
3. Edit a control as outlined in the DAW Edit Mode section of this guide.
4. Press the DAW/Preset button.
5. The display will show “SAVE?” with the following selections available.
• Cancel: Selecting “Yes” to Cancel will revert any changes made.
• Replace: Selecting “Yes” to Replace will write over the currently selected preset.
• Save As: Selecting “Yes” to Save As enable you to edit/change what the DAW’s name
“NAME” is. The last available selection in the Save As screen is Save. Pressing “Yes”
on the Save screen will save your new User DAW.
Note: When editing a DAW name, use the Encoder to scroll to a letter you want to edit
and press the Encoder to select the current letter. To erase a letter in a DAW name,
press SHIFT and the Back button.
To Next Page
Loading...
Need help?
General
