M-Audio Oxygen Pro Series User Manual

102
Saving a User DAW
To store a User DAW:
1. Press SHIFT and the DAW button to enter Edit Mode.
2. Edit a control as outlined in the DAW Edit Mode section of this guide.
3. Press the DAW button.
4. The display will show “SAVE?” with the following selections available.
• Cancel: Selecting “Yes” to Cancel will revert any changes made.
• Replace: Selecting “Yes” to Replace will write over the currently selected preset.
• Save As: Selecting “Yes” to Save As enable you to edit/change what the DAW’s
name “NAME” is. The last available selection in the Save As screen is Save. Pressing
“Yes” on the Save screen will save your new User DAW.
Note: When editing a DAW name, use the Encoder to scroll to a letter you want to edit and
press the Encoder to select the current letter. To erase a letter in a DAW name, press SHIFT
and the Back button.

M-Audio Oxygen Pro Series Specifications

General

Knobs/Encoders	8
Aftertouch	Yes
Key Action	Semi-weighted
Arpeggiator	Yes
Smart Chord/Chord Mode	Yes
Smart Scale/Scale Mode	Yes
Faders	9
Connectivity	USB
Pedal Inputs	Sustain
Power	USB bus power
Software	Pro Tools First, MPC Beats, Ableton Live Lite, AIR Music Tech Virtual Instruments (Hybrid 3, Velvet, Mini Grand, Vacuum Pro)
DAW Compatibility	Ableton Live, Logic Pro
Key Count	25, 49, 61