59
Shortcuts and Hot Keys
To edit the functionality of a Hot Key control – Metronome, or Pads 1 - 16 when in DAW Edit
Mode, press and hold the SHIFT button and press the TEMPO/METRO button or one of the
PADs. You can scroll through the available parameter values using the Encoder. Select what
parameter you would like to edit by pressing the Encoder.
Note: What some parameter values are set to will affect what parameters are available for
editing. For example, if the Button’s Mode parameter is changed from Note to Program, it will
change the editable parameters from Note parameters to Program parameters.
Mode “MODE”:
• ASCII Shortcut Key message “KEY”: Selects the PC keyboard key or PC keyboard key
combination message.
• CC
“CC”: The Metronome button or Pad will send its Shortcut message using this CC
number.
• Note
“NOTE”: The Metronome button or Pad will send its Shorcut message using this
Note number.
• Off
“OFF”: The Metronome button or Pad will not send a Shorcut message when pressed.
Color “COLOR”: Select the color that you want to assign to the Shortcut.
Key: Selects the keyboard key to use to trigger the pad or metronome.
Win Mod Key: Selects the Windows style modified keyboard key to use to trigger the pad or
metronome.
Mac Mod Key: Selects the macOS style modified keyboard key to use to trigger the pad or
metronome.
When set to CC, these are the available parameters:
CC: The Clip button will send its MIDI messages using this CC number.
Available Values: 0-127
To Next Page
Loading...
Need help?
General
