M-Audio Oxygen Pro Series User Manual

35
Sustain Pedal
To edit the Sustain Pedal when in Preset Edit Mode, press a connected Sustain Pedal. You
can scroll through the available parameter values using the Encoder. Select what parameter
you would like to edit by pressing the Encoder.
Channel: The Sustain Pedal will send its messages over this channel. Select the global
channel (Global), a specific channel (Channel 1–16), a zone (Zone 1–4), or all channels
(Omni).
Available Values: Global, 1-16, Zone 1-4, Omni
CC: The Sustain Pedal will send its MIDI messages using this CC number.
Available Values: 0-127
Press: The Sustain Pedal will send the MIDI CC number with this value when you press it.
Available Values: 0-127
Release: The Sustain Pedal will send the MIDI CC number with this value when you release it.
Available Values: 0-127
Latch: When set to Latch On, the Sustain Pedal will send one value when pressed and a
different value when pressed a second time, alternating between the two values with each
press. When set to Latch Off, the Sustain Pedal will send one value when pressed and one
value when released.
Available Values: On/Off

M-Audio Oxygen Pro Series Specifications

General

Knobs/Encoders	8
Aftertouch	Yes
Key Action	Semi-weighted
Arpeggiator	Yes
Smart Chord/Chord Mode	Yes
Smart Scale/Scale Mode	Yes
Faders	9
Connectivity	USB
Pedal Inputs	Sustain
Power	USB bus power
Software	Pro Tools First, MPC Beats, Ableton Live Lite, AIR Music Tech Virtual Instruments (Hybrid 3, Velvet, Mini Grand, Vacuum Pro)
DAW Compatibility	Ableton Live, Logic Pro
Key Count	25, 49, 61