6
Introduction
Box Contents
Oxygen Pro Series Keyboard Quickstart Guide
USB Cable User Guide (download)
Software Download Card Safety & Warranty Manual
Important: Visit m-audio.com to download the Oxygen Pro Preset Editor. The Preset Editor
gives you a visual and intuitive way to edit the various messages that Oxygen Pro's controls
send to your computer without having to use the hardware interface.
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit m-audio.com.
For additional product support, visit m-audio.com/support.
Setup
Connection
To start using your Oxygen Pro series keyboard, you need to connect your equipment, get
your software properly configured, and then set the keyboard’s operation Mode.
To connect your Oxygen Pro series keyboard to your computer, use the included USB
cable. Plug the USB-B end of the cable into the keyboard and the USB-A end of the cable into
your computer (or into a USB hub connected to your computer).
Note: In addition to sending data, the USB cable powers the keyboard. If you will be
connecting your Oxygen Pro series keyboard to a USB hub that has other devices connected
to it, then we recommend using a powered USB hub.
To Next Page
Loading...
Need help?
General
