M-Audio Oxygen Pro Series

88
LSB: The fader button will send this Bank LSB (Least Significant Byte) number when you press
it.
Available Values: 0-127
When set to Program Cycle, these are the available parameters:
Values: The fader button will cycle through this many Program values (one at a time) when you
press it: 1 Values, 2 Values, 3 Values, or 4 Values.
Available Values:
• 2 Values
• 3 Values
• 4 Values
First: The fader button will send this Program message first when you press it.
Available Values: 0-127
Second: The fader button will send this Program message second when you press it.
Available Values: 0-127
Third: The fader button will send this Program message third when you press it.
Available Values: 0-127
Last: The fader button will send this Program message last when you press it.
Available Values: 0-127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type: The fader button will send the next (Increment) or previous (Decrement) value number
in the range of values when you press it.
Min: The lowest Program value in the range of values will correspond with this setting.
Available Values: 0-127
Max: The highest Program value in the range of values will correspond with this setting.
Available Values: 0-127
When set to CC, these are the available parameters:
CC: The fader button will send its MIDI messages using this CC number.
Available Values: 0-127
Press: The fader button will send the MIDI CC number with this value when you press it.
Available Values: 0-127
Release: The fader button will send the MIDI CC number with this value when you release it.
Available Values: 0-127