169441 262 Revision D
Problem Solution Refer to
Symptom: Material Wrapping at Upper Cross Auger Beater Bars
NOTE:
Some newer upper cross augers do not have beater bars.
Crop conditions do not require
beater bars
Remove beater bars
3.20.1 Removing Beater Bars, page 92
Symptom: Material Accumulating on End Deflectors and Releasing in Bunches
End deflectors too wide
For headers with manual deck shift
only, trim deflector or replace with
narrow deflector (MD #172381)
3.19 Unplugging Cutterbar, page 91
TROUBLESHOOTING
To Next Page
Loading...
