Magellan Maestro 4040 - Selecting Categories for Display on the Map; Setting Alarms

5. Select Change My POI File.
6. Select Select a POI File.
7. Select the POI file to be loaded from the list
of available POI files by tapping on the file
name.
Select a POI\nFile
POI File List
Selecting Categories for Display on the Map
A POI file must be loaded (see Loading a POI File) for this function to operate.
1. From the
Main Menu, tap the Enter Address icon.
2. Select
Enhanced.
3. Select My POI.
4. Select Change My POI File.
5. Select Display Categories.
6. Use the checkbox to the left of the category
name
to select or deselect the category.
(Checked means
this category will have its
icon displayed
on the map.)
Tap Mark All to check all categories or Clear
All to uncheck all categories.
7.
Tap Save when done.
Enhanced POI Category List
Setting Alarms
A POI file must be loaded (see Loading a POI File) for this function to operate.An enhanced POI can
have
an alarm that will alert you when you are in range set by "Alert Parameters." Note that all
POls in the categories selected will have
their alarms set to on. A POI file must be loaded (see
Loading a POI File) for this function to operate.
1. From the
Main Menu, tap the Enter Address icon.
2. Select
Enhanced.
3. Select My POI.
Points of Interest
29