33
If the machine in supplied unprovided
with the plug, make sure that the
electrical connection is made by a
QUALIFIED ELECTRICIAN.
When pressing stop and/or off, the
power feeder must stop.
Work on the electrical system must
be carried out only by a skilled
electrician!
1-2 INTENDED USE
The use of and the maintenance
operations on the power feeder must
be carried out as described in this
instruction manual, including the
normal maintenance operations.
It is therefore advisable to look the
instruction manual over before
assembling the machine. Any
possible mechanical modifications
or tampering with the power
feeder, use or interventions not
foreseen, represent an anomalous
condition which, besides causing
damage to the machine, may
constitute serious harm to its
operator. In the case, the user’s
warranty and the manufacturer’s
liability are null and void.
The power feeder has been
designed and built to work with
machine tools that conform to the
safety requirements laid down in
the relevant standards (European
Directive 89/391/EEC).
In the event of non-conformity, it is
necessary to adapt said machinery
and to check the working order of
all safety devices before
connecting the power feeder to the
power system.
WARING
WARNING
WARNING
WARNING
EN
To Next Page
Loading...
