MAHA LPS 3000 - Program Structure Overview; General Information

BA052301-en 59
8 Program Structure
8.1 General Information
The program is menu-oriented. Data or instructions can be entered via the PC keyboard. The
remote control is used for the setup operation, for e.g. wheelbase setting, starting and stopping
of the pre-selected driving cycle.
The main menu is divided into several sub-menus which can be selected as follows:
• Wheel mouse: with mouse click
• Keyboard: Select with the Cursor keys and open with the <ENTER> key.
During the program procedure follow the instructions in the status line.
The following is described in the instructions:
• Program structure
• Starting the program
• Operation and explanation of the main screen and button strip
• End program / Switch off dyno